DigiTech JamMan SOLO XT User Manual

46
To select a Rhythm Type:
1. Select the desired memory location
using the <UP/DOWN> buttons.
2. Turn the <RHYTHM LEVEL> control
to the 9 o’clock position.
3. Press the <TEMPO> button at the
rate you want the phrase tempo to be.
This will set the tempo. The TEMPO
button LED will now be flashing to the
beat of the tempo.
4. Press the <SETUP> button four times,
or until rHy appears in the display.
5. Press the <UP/DOWN> buttons to
audition each pattern.
6. Once the desired rhythm type is
selected, press the <STORE> button
twice to store the changes or press
the <PEDAL SWITCH> to exit the
Setup menu without storing.

DigiTech JamMan SOLO XT Specifications

General

Sampling Rate	44.1 kHz
A/D/A Conversion	24-bit
Type	Looper Pedal
Storage	Internal, SD Card (optional)
Inputs	1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs	1 x 1/4" (mono)
USB	1 x Mini-B
Power Supply	9V DC power supply