DigiTech JamMan SOLO XT User Manual

54
To format or reformat a Micro SD/SDHC card:
1. Press and hold the <STORE> button
for six seconds. The display will show
For (Format Card) and the <STORE>
button will begin flashing.
2. Press the <STORE> button again. The
display will read F? (Format ?) and the
STORE button will continue to flash.
If you wish to abort this procedure,
press the <PEDAL SWITCH>. If you
wish to proceed, go to step 3.
3. To initiate the card formatting
procedure, press and hold the
<STORE> button again for two
seconds. The display will show BuS,
indicating the card is being formatted.
Wait for the format procedure to
complete.

DigiTech JamMan SOLO XT Specifications

General

Sampling Rate	44.1 kHz
A/D/A Conversion	24-bit
Type	Looper Pedal
Storage	Internal, SD Card (optional)
Inputs	1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs	1 x 1/4" (mono)
USB	1 x Mini-B
Power Supply	9V DC power supply