DigiTech JamMan SOLO XT User Manual

34
JAMSYNC
20
JAMSYNC
20
SLAVEMASTER
OUT Jam Sync IN
.
When cascading multiple JamMan Solo
XTs in series and using JamSync, you will
need to make the last JamMan Solo XT
device in the chain the master. The master
will provide the Rhythm Guide Track.
Therefore, you can turn the <RHYTHM
LEVEL>
control on the master device
to the desired listening level and ensure
all slaved devices have their <RHYTHM
LEVEL>
controls turned all the way
down. You will then want to record to
the last JamMan Solo XT device in the
signal chain (the master) first, then the
second to last device, etc., working your
way backwards through the signal chain.
Performing these three actions will
ensure you record only what you intend
to.

DigiTech JamMan SOLO XT Specifications

General

Sampling Rate	44.1 kHz
A/D/A Conversion	24-bit
Type	Looper Pedal
Storage	Internal, SD Card (optional)
Inputs	1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs	1 x 1/4" (mono)
USB	1 x Mini-B
Power Supply	9V DC power supply