EasyManuals Logo

DigiTech JamMan Solo User Manual

DigiTech JamMan Solo
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
16
Once a loop phrase is recorded, you can add overdubs over the top of it.
Overdubs can only be recorded to Loop phrases and not to Single phrases. If a phrase
has had the tempo changed, it must first be stored to memory before overdub recording
can proceed.
1
1
3
2
4
Select a previously recorded
Loop phrase, or use a newly
recorded phrase that has not
yet been stored. The LOOP
LED must be lit if a previously
recorded phrase is selected. If
the CARD MEM LED is lit, you
have selected a loop on the
optional memory card.
Press the PEDAL SWITCH. The
STATUS LED will light solid green
and the phrase will begin playing.
Press and release the PEDAL
SWITCH again to begin overdub
recording. The STATUS LED will now
light solid yellow and any audio
introduced will now be recorded
along with the playback.
When you have an overdub you are
happy with, press the PEDAL SWITCH
to end the overdub session and continue
playback.
Add Overdubs to a Loop
You can continue adding overdubs by continuing to press the PEDAL SWITCH. Each
time an overdub is added, the last overdub is merged with the original loop and it can no
longer be undone using the Undo feature. Once you are finished with overdubbing, press
the PEDAL SWITCH two times quickly to stop playback/overdubbing.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiTech JamMan Solo and is the answer not in the manual?

DigiTech JamMan Solo Specifications

General IconGeneral
MemoryInternal
External MemorySD/SDHC card up to 32GB
Inputs1 x 1/4"
Outputs1 x 1/4"
Power Supply9V DC

Related product manuals