DigiTech JamMan Solo User Manual

41
Multiple Loop Playback with FS3X
Another great feature of the JamMan
®
Solo is its ability to play different loops
back to back during performance using
the optional FS3X Footswitch. This lets
you play a verse > chorus > verse >
bridge progression seamlessly using three
different loops.
To set up multiple loops for verse/chorus/
verse/bridge playback, follow these
steps:
Record the verse loop and store it to 1.
memory location 1.
Record the chorus loop and store it 2.
to memory location 2.
Record the bridge loop and store it 3.
to memory location 3.
To use these three loops in a
performance, follow these steps:
Select Loop 1 (verse loop) and press 1.
the PEDAL SWITCH. Loop 1 will
begin playing back.
To switch to Loop 2 (chorus loop), 2.
press the UP footswitch on the
FS3X at least two seconds before
the end of Loop 1. Once Loop 2 is
selected, the DISPLAY will show a
flashing 2, indicating Loop 2 is cued
up to play once Loop 1 finishes. Once
Loop 2 begins playing, the DISPLAY
will stop flashing.
To select Loop 1 again, press the 3.
DOWN footswitch on the FS3X.
After Loop 1 begins playing again, you 4.
can then select Loop 3 (bridge loop)
by pressing the UP footswitch twice.
The DISPLAY will show a flashing 3.

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English