12
Getting Started
Making Connections
There are several different connection options available with the RP155. Before connecting the
RP155, make sure that the power to your amplifier and the RP155 is turned off. There is no
power switch on the RP155. To turn the RP155 on or off, connect or disconnect the included
PS0913B power supply from the Power Input jack.
Mono Operation - Amplifier
Connect your guitar to the Input of the RP155. Connect a single mono instrument cable from
the Left (Mono) output of the RP155 to the instrument input or effect return on your amplifier.
Set the Amp/Mixer switch to Amp.
NOTE: When using a
guitar amp, it may be best to
connect the Output of the
RP155 to the effect return
of the amplifier.