26
centers for Mid and Treble. Pressing this knob turns the EQ on and off.
Bass-Knob2 adjusts the amount of low end level (Bass).
Midrange - Knob3 adjusts the amount of midrange level.
Mid Freq (X-Edit
TM
only) - This parameter selects the frequency that the Mid parameter
adjusts. Ranges from 300 Hz to 5000 Hz.
Treble - Knob 4 adjusts the amount of high end level (Treble).
Treble Freq (X-Edit only) - This parameter selects the frequency that the Treb parameter
adjusts. Ranges from 500 Hz to 8000 Hz.
Noise Gate
A Noise Gate () is designed to eliminate noise while you are not playing; this model also
includes an Auto Swell (), which provides an automatic volume swell effect.
Gate Model - Knob 1 selects between the DigiTech
®
noise gate or the volume swell effect.
Values include: (Selects the noise gate) and (Selects the volume swell effect.) Press
this knob to turn the noise gate or auto swell on and off.
Threshold/Swell Sensitivity - Knob 2 sets the signal strength (Threshold) required to
open or close the Noise Gate, or the Swell Sensitivity for the Auto Swell. Both parameters
range from (opens easily/high sensitivity) to (requiring strong signals to open/high sen-
sitivity).
AttackTime-Knob3 sets the attack time. Ranges from (shorter attack time) to
(longer attack time).
Release - Knob 4 sets the Release parameter. Ranges from to .
Attenuation (X-Edit
TM
only)-Knob5 sets the Attenuation parameter. Ranges from to
.
To Next Page
Loading...
Need help?
General
