To Next Page

To Previous Page

RP360 / RP360 XP

Changing Effects

Most of the effects in the RP360/RP360XP have

multiple effects to choose from� For example, the

Delay effect offers a Ping Pong Delay, Tape Delay,

Analog Delay, etc��

Plexi-Drive 1

LOOPER READY

MODEL

CRY WAH

LEVEL

1/2

CMP DST GAT

0 dBBYPASS

ON/BYP

To change an effect:

1�

From the Performance state, press the SELECT knob to enter the Effect Edit menu�

2� Turn the SELECT knob to select the effect you would like to edit�

3� Turn the EDIT 2 knob to change the effect type� The selected effect will be shown at the top of

the LCD display�

4� Repeat steps 2-3 to change any other effects�

5� When done, press the BACK button to return to the Performance state�

6� Store the changes to a user preset, see Storing/Copying/Naming Presets on page 17�

NOTE: Effects can also be changed from the Effect Options Edit menu� This menu is accessed by

pressing and holding the

SELECT knob when in the Effect Edit menu� You can then turn the EDIT

knob to change the effect model� From this menu, you can also move the effect to a different

location in the effects chain or delete an effect from the effects chain�

DigiTech RP360 User Manual

Other manuals for DigiTech RP360