Page 4
7. Status LED
This LED lights to indicate the effect is on. When the effect is bypassed, this LED will be
off.
8. Effect On/Off Switch
This switch turns the Whammy, Harmony, or Detune effect on and off.
9. Power Input
Connect the power supply to this jack. Do not use any power supply other than the
included power supply.
10. Output Jack
Connect this jack to another pedal input or the input of an amplifier.
11. Instrument Input
Connect your instrument to this jack.
12. MIDI Input
Connect an external MIDI device to this jack for the purpose of controlling the Whammy
remotely.
To Next Page
Loading...
