Digitus DA-81002 - 8.4 UPC-A Barcode Settings; 1. Permit and Prohibit Reading Function; 2. Additional Code Forced Output; 3. UPC-A Conversion EAN13 Enable

31
**Allow UPC-A reading
Prohibit UPC-A reading
2. Additional code forced output function allows and prohibits
UPC-AForce output
additional code
**UPC-A No additional output required
Users can read the following setting codes to configure the UPC-A additional code enabling and
disabling.
UPC-A-2-digit additional code enable ** UPC-A-2-digit additional
code disable
UPC-A-5-digit additional code enable ** UPC-A-5-digit additional
code disable
3. UPC-A conversion EAN13 enable
The user can allow/disable the conversion of UPC-A to EAN13 by reading the following setting
codes.
Allow UPC-A to EAN13
**Prohibit UPC-A to EAN13
8.5 UPC-E0
1. Permit and prohibit the reading function
The user can allow and prohibit the UPC-E0 barcode reading function by reading the following
setting codes.