Digitus DA-81002 - 8.6 UPC-E1 Barcode Settings; 1. Permit and Prohibit Reading Function; 2. Additional Code Forced Output

33
UPC-E1 Force output additional code
**UPC-E1No additional
output required
Users can read the following setting codes to configure the UPC-E1 additional code enabling and
disabling.
UPC-E1-2-digit additional code enable
** UPC-E1-2-digit
additional code disable
UPC-E1-5-digit additional code enable
** UPC-E1-5-digit
additional code disable
8.7 Code 128
1. Permit and prohibit the reading function
The user can enable or disable the Code128 barcode reading function by reading the following
setting codes.
**Allow Code128 reading
Prohibit Code128 reading
2. Reading length setting
Users can set the shortest and longest reading length of Code128 by reading the following setting
codes.
Code128 min length of the message 0
**Code128 min length of
the message 4