Digitus DA-81002 - 8.15 MSI Barcode Settings; 1. Permit and Prohibit Reading Function; 2. Reading Length Setting

42
The user can allow and prohibit the simultaneous reading of multiple DM codes by reading the
following setting codes.
Allow reading multiple DM functions at
same time
**Prohibit reading multiple DM functions at
same time
3. PDF 417
**Allow PDF417 reading
Prohibit PDF417 reading
9. Save and Cancel
9.1 Save
After reading "Data Code", you need to read the "Save" setting code to save the data.
Save
9.2 Cancel
When there is an error in reading the data, the following setting codes can be read to cancel the
current setting, cancel the data read previously, and cancel a string of data read previously.
Cancel one bit of data previously read Cancel a string of data
previously read
Cancel current setting
Note: To cancel the current setting, all the data codes read before are canceled, and the setting
needs to be reset after canceling