Digitus DA-81002 - USB-HID Interface Configuration; Communication Mode Selection; PC to HID Device Access Cycle

5
2. Parity Mode
**No Parity (None)
Odd Parity
Even Parity
2.3 USB-HID Interface-related configuration
1. Communication Mode Selection
When the device is used as a HID device, it can be two different devices. Users can configure by
reading the following setting codes.
**HID-KBW HID-POS
2. PC to HID device access cycle
Read the following setting codes, you can modify the PC access cycle to the HID device, the cycle
range: 1ms～64ms.
**1 ms
3 ms
5 ms
10 ms