WAN Connection Type:
Select ADSL Dialup (PPPoE) from the drop-down list.
WAN IP Setting:
Input the IP Address, Subnet Mask and Default Gateway provided
to you by your ISP.
WAN DNS Setting:
Select No to set the DNS manually and input the DNS Server IP. If
you don’t know, please check with your ISP.
The MTU value can be changed if required.
WAN MAC Address Setting:
This has a default value given by the manufacturer and you are
recommended not to change this value.
LAN IP Setting:
There is a default LAN IP given by the manufacturer. You can
change this as required. Please note that you should use the new
IP address to login to this router.
Apply/Cancel:
Click Apply to save the settings or click Cancel to aboard.
Automatic IP
21
To Next Page
Loading...
Need help?
General
