apply to TCP or UDP or both.
Start Time/End Time:
Set a period of time to drop or accept the connection.
Type:
Select from the drop-down list for dropping or accepting the
connection.
Add/Del:
After fill up all your requirement of a rule, click Add to add the rule to
the rule table. If you want to delete a rule from the table, select the
rule and click Del. Then the high-lighted rule will be removed from
the list.
Priority:
A connection is to be accepted or to be dropped is according to the
first matching rule from the top of the rule table. You can change the
priority of a rule by select the rule and click Higher or Lower.
Apply/Cancel:
Click Apply to save the settings or click Cancel to aboard.
4.4.2 MAC Filter
MAC filter drops or accepts a connection according to its MAC
address.
32
To Next Page
Loading...
