NAT Setup contains three functional items including Port Trigger,
Virtual Server and Virtual DMZ.
4.3.1 Port Trigger
Application-triggered port forwarding opens a port only when a
program needs to use it. You can set a trigger port to open an
incoming port. When trigger ports are used, the system opens the
specified incoming ports.
To setup port trigger, follow the instructions below.
Enable Port Trigger:
Select Yes to enable or No to disable port trigger.
Popular Applications:
The drop-down list has listed some popular applications, you can
get the port number of an application by selecting from the
drop-down list. Or you can also select User Defined from the list
27
To Next Page
Loading...
