DHCP Server supports up to 253 IP addresses for you local
network. Follow the instructions to configure DHCP Server.
Enable DHCP Server:
Select Yes to enable or No to disable DHCP Server.
Domain Name:
Domain Name is the name which you had registered from NIC
(Network Information Center). Ignore this part if managers don’t
apply for a domain name.
IP Pool Starting/Ending Address:
You can use this to set the IP range that the DHCP server can offer.
WINS (Windows Internet Naming Service) Server:
Input a WINS server IP if there is a WINS Server in the local
network.
Apply/Cancel:
Click Apply to save the settings or click Cancel to aboard.
4.2.3 Routing Table
24
To Next Page
Loading...
