Enable MAC Filter:
Select Yes to enable or No to disable MAC filter.
MAC Address specified will be:
Select DROP or ACCEPT from the list to mean all the connections
to the MAC addresses on the list should be dropped or accepted.
MAC Address:
Input the MAC address that you want to apply to this rule.
Start Time/End Time:
Set a period of time to drop or accept the connection.
Add/Del:
After fill up all your requirement of a rule, click Add to add the rule to
the rule table. If you want to delete a rule from the table, select the
rule and click Del. Then the high-lighted rule will be removed from
the list.
Apply/Cancel:
Click Apply to save the settings or click Cancel to aboard.
4.4.3 URL Filter
URL filter blocks a connection according to its URL.
33
To Next Page
Loading...
