Enable Print Server:
Select Yes to enable or No to disable print Server.
Printer1 Name:
This is the printer name of the first printer. There will be a default
printer name. You can change it if you want. Remember this name
will be the one you should use when adding printer on Windows.
Printer1 Model:
The model of the first printer.
Printer2 Name:
This is the printer name of the second printer. There will be a
default printer name. You can change it if you want. Remember this
name will be the one you should use when adding printer on
Windows.
Printer2 Model:
The model of the second printer.
Apply/Cancel:
Click Apply to save the settings or click Cancel to aboard.
Add a printer on Windows:
Please follow the steps listed below to add a printer on Windows.
Go to “Start” select Printers and Faxes.
38
To Next Page
Loading...
