150
9.5 Other Commands
9.5.1 ipconfig
“ipconfig” command is used to quickly get the IP
settings (IP, subnet mask, default gateway) of the print
server:
admin# ipconfig
IP_ADDR=192.168.2.2
SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.2.254
9.5.2 reboot
“reboot” command is used to restart the print server:
admin# reboot
9.5.3 exit
“exit” command is used to leave the print server telnet
management:
admin# exit
9.5.4 help
“help” command is used to list all telnet management
commands of the print server:
admin# help
To Next Page
Loading...
Need help?
General
