-10-
4.4 Playback
To play a recording, click “ ” (Miscellaneous Control) → “ ” (Status List), and select the “Record” tab. A list of
all the recordings will be shown by defaults, and you can also sort out the logs you want to speed up the search time.
For details, please see “5.6 Status List” at page 27.
To immediately play a recording file, select a log from the list, and click “Play” button, or double-click the selected log.
Then, the playback control panel will be shown at the bottom of the main control panel similar to the following.
For the playback control panel details, please see “Playback Screen” at page 31.
To Next Page
Loading...
Need help?
General
