-17-
Log
Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Log” to go into the “Log” page. In
the “Log” page, you can see all the logs for the network camera, such as “Power On”, “Reset Default”, “Net Login” and
“SNTP Update” … etc.
‧To refresh the logs, click “Reload”.
‧To view the earlier or later logs that are not shown in the current page, click “Prev. Page” or “Next Page”.
‧To clear all the logs, click “Clean”.
Account
Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Account” to go into the “Account”
page. In the “Account” page, you can create a new account for login, or delete or modify the existing account setting.
To add an account, click “New”, and set the “User Name”, “Password”, “User Level” and “Life Time”. Then, click
“Apply” to save your setting and create a new account.
‧ To modify an existing account, select the account you want, change the setting, and click “Apply”.
‧ To remove an existing account, select the account you want, and click “Delete”.
‧ To save your changes, click “Apply”.
Column Description
User Name Set a user name that will be used for remote login. The user name allows up to 31 characters.
Password Set the password that will be used for remote login. The password allows up to 31 characters.
User Level Set the security level of an account to give the permission to control different Video Viewer functions.
There are 4 user levels: “Supervisor”, “Power User”, “Normal User” and “Guest”.
To Next Page
Loading...
Need help?
General
