10
Real panel
Power input: Supports input voltages 100-240VAC, 50/60Hz.
Switch: turn on the switch after inserting the power cord, “I” means to
turn on, “O” means closing.
Grounding: use specialized ground lead connect
6. Hardware installation
This chapter provides unpacking and installation information for the
switch.
6.1 Switch installation
For safe switch installation and operation, it is recommended that
you:
Visually inspect the power cord to see that it is secured fully to
the AC power connector.
Make sure that there is proper heat dissipation and adequate
ventilation around the switch.
Do not place heavy objects on the switch.
To Next Page
Loading...
