13
C) Mechanical Loading - Mounting of the equipment in the rack
should be such that a hazardous condition is not achieved due to
uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the
connection of the equipment to the supply circuit and the effect
that overloading of the circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing
this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to
supply connections other than direct connections to the branch
circuit (e.g. use of power strips)."
7. Getting Started
This chapter introduces the management interface of switch.
7.1 Using Web-based Management
After a successful physical installation, you can configure the Switch,
monitor the network status, and display statistics using a web
browser.
7.2 Supported Web Browser
The embedded Web-based Management currently supports the
following web browsers:
Internet Explorer 6 or higher version
Netscape 8 or higher version
Mozilla
Firefox 1.5/2.0 or higher version
To Next Page
Loading...
