17
This cable is used to connect the console port of the switch to the
external monitoring terminal. One end of the RJ45 eight-pin plug, the
other end is a 25-hole plug (DB25) and 9-hole plug (DB9), RJ45 head
into the switch’s console port socket, DB25 and DB9 can be used
according to the requirements of the terminal serial port, the cable
internal connection schematic as follows:
RJ45<===>DB9
NC1-------8CTS
NC2-------6DSR
TXD3------2RXD
GND4------5GND
GND5------5GND
RXD6------3TXD
NC7-------4DTR
NC8-------7RTS
This is a Class A product. In home environment, this product may
cause radio interference.
In this case, the user may be required to take appropriate measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
To Next Page
Loading...
