Dillon AP Installation Instructions

AP_Dynamometer_i_en_16951_0013.book
Dillon is part of Avery Weigh-Tronix. Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose
ultimate parent company is Illinois Tool Works Inc (“Illinois Tool Works”). Copyright © 2017 Illinois Tool Works. All rights reserved.
No part of this publication may be reproduced by making a facsimile copy, by the making of a copy in three dimensions of a two-dimensional
work and the making of a copy in two dimensions of a three-dimensional work, stored in any medium by electronic means, or transmitted in
any form or by any means, including electronic, mechanical, broadcasting, recording or otherwise without the prior written consent of the
copyright owner, under license, or as permitted by law.
This publication was correct at the time of going to print, however Avery Weigh-Tronix reserves the right to alter without notice the
specification, design, price or conditions of supply of any product or service at any time.
1

Dillon AP Specifications

General

Category	Measuring Instruments
Type	Analog Pressure Gauge
Accuracy	±1% of Full Scale
Display	Analog dial
Power	None (mechanical)
Capacity	Varies by model
Units of Measure	psi, bar, kPa
Dial Size	2.5 in or 4 in (depending on model)
Connection	1/4" NPT or 1/2" NPT (depending on model)
Material	Brass or Stainless Steel (depending on model)
Liquid Filled	Optional