Dillon AP Installation Instructions

Dynamometer Installation Instructions 3
1.1 About this manual
1General information and warnings
1.1 About this manual
This manual is divided into chapters by the chapter number and the large text at the top
of a page. Subsections are labeled as shown by the 1.1 and 1.1.1 headings. The
names of the chapter and the next subsection level appear at the top of alternating
pages of the manual to remind you of where you are in the manual. The manual name
and page numbers appear at the bottom of the pages.
1.1.1 Text conventions
Key names are shown in bold and reflect the case of the key being described. If a key
has a dual function it may be referred to by its alternate function.
Displayed messages appear in bold italic type and reflect the case of the displayed
message.
Annunciator names appear as italic text and reflect the case of the annunciator.
1.2 Special messages
Examples of special messages you will see in this manual are defined below. The
signal words have specific meanings to alert you to additional information or the relative
level of hazard.
WARNING! This is a Warning symbol. Warnings mean that failure to follow
specific practices and procedures may have major consequences such as
injury or death.
CAUTION! This is a Caution symbol. Cautions give information about
procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
NOTE: This is a Note symbol. Notes give additional and important information, hints
and tips that help you to use your product.

Dillon AP Specifications

General

Category	Measuring Instruments
Type	Analog Pressure Gauge
Accuracy	±1% of Full Scale
Display	Analog dial
Power	None (mechanical)
Capacity	Varies by model
Units of Measure	psi, bar, kPa
Dial Size	2.5 in or 4 in (depending on model)
Connection	1/4" NPT or 1/2" NPT (depending on model)
Material	Brass or Stainless Steel (depending on model)
Liquid Filled	Optional