Why does my Dimplex Indoor Fireplace trip the circuit breaker?
If your Dimplex Indoor Fireplace circuit breaker trips or a fuse blows when you turn it on, it could be due to a short in the unit's wiring, so trace the wiring in the unit. Alternatively, the circuit may be overloaded. Try plugging the unit into another outlet or installing it on a dedicated 15 amp circuit.
Why won't my Dimplex Indoor Fireplace heater turn off?
If your Dimplex Indoor Fireplace heater is not turning off, consider the following: * Improper operation: Refer to Operation Section. * Defective Thermostat: Replace Thermostat. * Defective Remote Control Receiver: Replace Remote Control Receiver.
What causes my Dimplex Indoor Fireplace heater to not turn on?
If your Dimplex Indoor Fireplace heater is not turning on, it could be due to: * Improper operation: Refer to the Operation Section. * Loose Wiring: Trace wiring in unit. * Defective Thermostat: Replace Thermostat. * Defective Heater assembly: Replace Heater assembly. * Defective Remote Control Receiver: Replace Remote Control Receiver.
Why does my Dimplex Indoor Fireplace turn on and off by itself?
If your Dimplex Indoor Fireplace is turning on or off by itself, it could be due to several reasons: * The remote control has a similar frequency to other remotes in the area, so replace the Remote Control and initialize it to the Remote Control Receiver. * Radio frequency disturbance from outside sources, so replace the Remote Control and Receiver where necessary and initialize them. * A defective Remote Control Receiver, so replace the Remote Control Receiver and initialize it to the Remote Control.
Why does my Dimplex Indoor Fireplace fan work but there is no heat?
If your Dimplex Indoor Fireplace heater fan turns on but doesn't produce heat, the issue could stem from: * Improper operation: Refer to the Operation Section. * Loose wiring: Trace wiring in unit. * Defective Thermostat: Replace the Thermostat. * Defective Heater Assembly: Replace the Heater assembly.
Why doesn't my Dimplex Indoor Fireplace turn on with the remote?
If your Dimplex Indoor Fireplace is not turning on using the remote control, it could be due to several reasons: * Improper operation: Refer to the Operation Section. * Remote control not initialized to fireplace: Initialize the remote control. * Remote control not working: Install a new battery into the Remote Control and reinitialize the Remote Control and Receiver, where necessary. * Replace Remote Control or Receiver where necessary and Initialize Remote Control and Receiver.
Why does my Dimplex Indoor Fireplace heater turn off after a few minutes?
If your Dimplex Indoor Fireplace heater is turning off after a couple of minutes, it could be due to a buildup of dirt or dust in the heater assembly. Make sure the exterior intake louvers and firebox cavity are free of dirt and dust. Alternatively, the heater assembly itself may be defective and require replacement.
What to do if my Dimplex Indoor Fireplace does not turn on manually?
If your Dimplex Indoor Fireplace is not turning on manually, there might be several reasons: * Improper operation: Refer to the Operation Section. * No incoming voltage from the electrical wall socket: Check the fuse/breaker panel. * Loose wiring: Check wiring connections. * Defective switch: Replace the switch. * Defective Remote Control Receiver: Replace the Remote Control Receiver and initialize the Remote Control and Receiver.
How to stop my Dimplex Indoor Fireplace from dimming the lights?
If the lights in the room dim when your Dimplex Indoor Fireplace is on, it's likely that the unit is drawing close to the circuit's current rating. To resolve this, try moving the unit to another outlet or installing it on a dedicated 15 amp circuit.
Why does my Dimplex Indoor Fireplace heater emit an odor?
If your Dimplex Indoor Fireplace is emitting an odor, it is likely normal operation, especially when the heater is initially turned on. This happens as the heater burns off any dust accumulated during manufacturing or operation. However, if the odor persists or seems unusual, it could indicate a defective heater assembly that should be replaced.
General| Model | DF2690 |
|---|---|
| Type | Electric Fireplace |
| Heating Capacity | Up to 400 sq. ft. |
| Voltage | 120V |
| Heater | Yes |
| Flame Effect | Yes |
| Adjustable Thermostat | Yes |
| Remote Control | Yes |
| Fuel Type | Electric |
| Color | Black |
| Power Consumption | 1500 Watts |
To Next Page
