DINGLI S06-E User Manual

OPERATOR’S MANUAL with Maintenance Information
Maintenance
68
13 Install the hydraulic pump inlet line into the
tank. Install the fitting onto the pump and
torque.
14 Install the hydraulic pump return line into
the tank. Install the fitting onto the
hydraulic filter head and torque.
15 Fill the tank with hydraulic oil until the fluid
is full in the hydraulic tank. Do not overfill.
16 Activate the pump to fill the hydraulic
system with oil and bleed the system of air.
Component damage hazard.
The pump can be damaged if operated without
oil. Be careful not to empty the hydraulic tank
while in the process of filling the hydraulic
system. Do not allow the pump to cavitate.

DINGLI S06-E Specifications

General

Brand	DINGLI
Model	S06-E
Category	Scissor Lifts
Language	English