To Next Page

To Previous Page

Regular Maintenance

Maintenance should be carried out only by persons who have acquired the necessary

technical expertise and are specialized and trained for this purpose.

Every 3 months

- Check all dimensions of the parts which make up the

instrument;

- Check the wear on the handle or the eyelet, by

checking if there are any plastic deformations,

mechanical damages(irregular), cracks, corrosion,

damage to threaded portions and the twists;

- Check the tightness of the splice plate on the hook,

and the presence of defects, and ensure its proper

functioning;

- Make sure that the split pin and the shackle nuts are

firm;

- If other metrological and mechanical irregularities

are detected, have the electronic crane scale

repaired by qualified personnel (authorized

assistance service).

An incorrect measurement of weight may be a sign

of a mechanical problem with the crane scale. If the

crane scale weighs incorrectly, the crane scale must

be repaired by skilled personnel (Authorized Service

Center).

Do not for any reason carry out the repair by

yourself.

In case of non-compliance turn immediately off the

electronic crane scale.

All repair operations and the parts used are

classified and stored in the maintenance register.

Every 12 months

All of the elements that transmit the load, including the

load cell, should be checked by specialised personnel

qualified in inspection and maintenance of cranes and

bridge cranes.

It is of utmost importance that all the maintenance and repair operations, and the used

components are recorded and filed in the appropriate product maintenance registry.

Dini Argeo MCW User Manual

Questions and Answers: