Why my Dini Argeo Scales does not switch on?
If your Dini Argeo scale isn't turning on, first ensure the power cable is securely connected. If that doesn't work, connect the battery charger and try again. If it still fails to power on, it is recommended to contact the dealer.
What to do if my Dini Argeo TPWLK Scales does not print?
If your Dini Argeo scale isn't printing, ensure there is a roll in the printer and that the printer is switched on. Also, check if the weight is unstable (unStAb), or if the net or gross weight is negative or insufficient (low). Finally, verify that there is no underload or overload (______ or ------) (un.oVEr), the scale was unloaded after the last printing (no.0.unS), and you are attempting to print an approved weight.
Why Dini Argeo TPWLK Scales switches off suddenly?
If your Dini Argeo scale is suddenly switching off, it may be due to the automatic switch-off function being active, a low battery, battery failure, or a power supply line failure.
How to fix unstable weight on Dini Argeo Scales?
If the weight reading on your Dini Argeo scale is unstable, check if the weighing filter is active. If the scale is on a surface that vibrates due to machinery or vehicles, move it to a more stable surface.
What to do if Dini Argeo TPWLK Scales does not tare?
If your Dini Argeo scale isn't taring, it could be due to several reasons: the weight is unstable (unStAb), the gross weight is negative (loW), the weight is insufficient, the weight exceeds the maximum capacity, the tare function has been deactivated, or in the event of manual tare, the value exceeds the maximum capacity.
Why Dini Argeo Scales does not accumulate?
If your Dini Argeo scale isn't accumulating, make sure there is a roll in the printer and that the printer is switched on. Also, ensure that the weight is stable (unStAb), the net or gross weight is not negative (loW), there is no underload or overload (______ or ------) (un.oVEr), the scale was unloaded after the last printing (no.0.unS), and the weight is sufficient for the weighing operation (low), meaning it's not less than 10 divisions for accumulator modes or less than 'Min' for approved products (as shown on the measuring plate).
Why Dini Argeo TPWLK Scales is not reactive?
If your Dini Argeo scale is not reactive, it might be because one of the energy-saving modes is active or an unsuitable weighing filter has been selected.
What does permanent “Zero” message on Dini Argeo TPWLK Scales mean?
If your Dini Argeo scale permanently displays a “Zero” message, it means that the scale is unable to automatically reset the weight because it exceeds the maximum resettable weight at switch-on. Unload the scale and try again. If the scale continues to have the same problem even when there is nothing on it, contact the dealer.
Why Dini Argeo Scales does not carry out sampling?
If your Dini Argeo scale does not carry out sampling, it may be because the weight is unstable (Err.Mot) or the weight is insufficient; in this case, add more pieces and try again (Error).
Why Dini Argeo TPWLK has lost the total?
Switching off the Dini Argeo scale causes the accumulated totals to be lost.
Essential safety precautions and warnings for installation, use, and maintenance.
Details the necessary PPE for operations like assembly and maintenance.
Describes risks that remain despite safety design and how to avoid them.
Defines the proper industrial applications for weighing and handling Europallets.
Lists forbidden uses that are considered improper and void warranty.
Mandatory actions and forbidden activities for operators during use.
Detailed technical data for different TPW models, including capacity and dimensions.
Critical safety warnings related to lifting, handling, and transport operations.
Important safety warnings to be followed during assembly operations.
Detailed instructions for assembling the pallet truck components.
Key safety guidelines and precautions for operating the pallet truck.
Essential checks to perform before operating the pallet truck.
How to position the pallet truck correctly under a load for weighing.
Procedure for lifting loads and obtaining accurate weight readings.
Steps to turn the scale on and initialize it for operation.
How to set the scale display to zero before weighing.
How to use the automatic tare function to subtract container weight.
Checking weights against reference values and tolerances.
Critical warnings for performing maintenance safely and by qualified personnel.
Procedures for regular inspection, cleaning, and lubrication.
Solutions for problems related to the printer not working or producing output.
Solutions for issues related to zeroing, taring, or tare limits.
Solutions for problems like scale instability, reactivity, or sudden shutdowns.
Explanation of error codes displayed by the scale and their solutions.
General| Brand | Dini Argeo |
|---|---|
| Model | TPWLK |
| Category | Scales |
| Language | English |
To Next Page
