TPW
29
1 2
3
Packaging and handling
USER_MAN_ENG_TPW_v4
Packaging removal
To remove the packaging, proceed as follows:
1. Place the packaging containing the machine in the place of destination.
2. Remove the machine parts from the packaging and place them on a flat surface.
3. Proceed with assembly operations (refer to chapter “ASSEMBLY”).
WARNING!
The TPWLKI and TPWLKW models on the other hand, are transported fully assembled on a pallet and
strapped to it.
Packaging disposal
The packaging is an integral part of the supply and is not collected, therefore the purchaser is in charge of disposing
of it.
IMPORTANT!
Dispose of the packaging in compliance with the regulations in force in the country of the user.
To Next Page
