TPW
79
A B
C
D E
Maintenance
USER_MAN_ENG_TPW_v4
Tank top-up by means of syringe for models with mono-block pump
Check the oil level every 6 months.
Only use hydraulic oil (not motor or brake oil) to top-up.
Oil viscosity: 30 CST at 40°C
Total volume: 0.3 l
A. Fully lower the forks.
B. Unscrew and remove the oil tank closing screw.
C. If required, add oil through the syringe (not supplied) until the first leak.
D. Operate the pump several times to release any air from the hydraulic circuit, then lower the forks completely.
E. Reassemble the closing screw.
To Next Page
Loading...
