3
IMPORTANT NOTICE: before using this crane scale, you must read the following safety
instructions and the user manual. Copy of the user manual is freely available for
download at http://www.diniargeo.com.
GENERAL SAFETY NORMS
The user must respect the manufacturer’s recommendations for the crane scale; one must
respect the instructions requested by the manufacturer of the lifting device, and those
highlighted in the safety data sheet of the product which must be weighed.
Laws and national norms
Before putting into service and while using it, the user must verify that all norms in force in the
Country where the instrument is used in regards to “safety and prevention of casualties” and
“metrology” are respected.
It is also important to take into account and respect the laws and guidelines for the safety
controls of the Country of use.
Carefully respect all the safety measures and maintenance
General warnings
The electronic crane scale is to be considered a scale, and
therefore use must be limited only to weighing needs. The
crane scale is not designed for cargo handling and
transportation. Once the load harnessing operation is done,
move away, and make sure that the load is well balanced lifting
it up only a few centimetres from the ground and then lift the
load down to the ground again. Remove the crane scale at the
end of the weighing operations.
To Next Page
Loading...
Need help?
General
