Dini Argeo MCW - Page 18

Maximum tolerance allowed / Verication criteria Reference measurement, to perform before putting into service
Regular checks
Date Signature Date Signature Date Signature Date Signature Date Signature Date Signature Date Signature Date Signature
3 months 6 months 9 months
12 months 15 months 18 months 21 months 24 months
Upper cricket
B (mm) +/- 5%
D (mm) +/- 5%
S (mm) +/- 5%
Usury
Must be
absent
Nut and
cotter
Present xed
strong
Lower cricket
B (mm) +/- 5%
D (mm) +/- 5%
S (mm) +/- 5%
Usury
Must be
absent
Nut and
cotter
Present xed
strong
Hook
C (mm) +/- 10%
D (mm) +/- 5%
E (mm) +/- 10%
H (mm) +/- 10%
Usury
Must be
absent
Safety
lever
Present and
in good
condition
Serial number:
Capacity:
Date of the rst checking (*):
Controller: Signature: