Directed Electronics Ready Remote User Manual

6
© 2006 Directed Electronics
to assure that the system does not unintentionally
remote start the vehicle.
4. THE USER MUST INSTALL A CARBON
MONOXIDE DETECTOR IN OR ABOUT THE
LIVING AREA ADJACENT TO THE VEHICLE.
ALL DOORS LEADING FROM ADJACENT
LIVING AREAS TO THE ENCLOSED OR
PARTIALLY ENCLOSED VEHICLE STORAGE
AREA MUST AT ALL TIMES REMAIN CLOSED.
➤ Use of this product in a manner contrary to its intended mode
of operation may result in property damage, personal injury,
or death. Except when performing the Safety Check outlined
in this user’s guide, (1) Never remotely start the vehicle with
the vehicle in gear, and (2) Never remotely start the vehicle
with the keys in the ignition. The user will be responsible for
having the neutral safety feature of the vehicle periodically
checked, wherein the vehicle must not remotely start while
the car is in gear. This testing should be performed by an
authorized Directed dealer in accordance with the Safety
Check outlined in this product installation guide. If the
vehicle starts in gear, cease remote start operation immediately
and consult with the Dealer to fix the problem immediately.
➤ After the remote start module has been installed, test the
remote start module in accordance with the Safety Check
outlined in this installation guide. If the vehicle starts when
performing the Neutral Safety Shutdown Circuit test, the

Directed Electronics Ready Remote Specifications

General

Brand	Directed Electronics
Model	Ready Remote
Category	Remote Starter
Language	English