EasyManuals Logo

Directed Electronics Ready Remote User Manual

Directed Electronics Ready Remote
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
44
© 2006 Directed Electronics
step 9
Immobilizer Bypass Modules
Most newer vehicles have a factory engine immobilizer system
designed to prevent any unauthorized use of the vehicle. These
immobilizers will cut off power to the starter and the fuel supply
preventing a thief from starting the vehicle.
There are several types of immobilizers, with the most common
being the resistance based passlock/passlock 2 systems found on
most newer GM vehicles. This system can be bypassed using the
555L immobilizer bypass module available at your local retail
dealer. The majority of transponder-based immobilizer systems
can be bypassed using the 555U or 556U immobilizer bypass
module available at your local retail dealer.
The BLUE wire (H1/1) of the primary harness supplies a
200mA output as soon as the control module begins the remote
start process. This wire can be used to activate an immobilizer
bypass unit.
note: This unit requires you to use one of your factory keys.
You may want to acquire another key from the dealer.
note: Any vehicle equipped with a factory immobilizer
must use an immobilizer bypass module to remote start.
If not used, the vehicle ignition or fuel supply circuits
could lock up and require a costly trip to the dealer to
reset the computer system.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Directed Electronics Ready Remote and is the answer not in the manual?

Directed Electronics Ready Remote Specifications

General IconGeneral
BrandDirected Electronics
ModelReady Remote
CategoryRemote Starter
LanguageEnglish

Related product manuals