Directed Electronics Ready Remote User Manual

8
© 2006 Directed Electronics
mmaaiinn hhaarrnneessss ((HH11)),,
88--ppiinn ccoonnnneeccttoorr
___
___
___
___
___
___
___
___
Use the following wiring guidelines for the H1 harness.
PPiinn ## WWiirree CCoolloorr NNoottee
H1/1 Blue Required when using a bypass module or a
(-) 3
rd
ignition output.
H1/3 Brown This wire
mmuusstt
be connected.
H1/7
Lt. Green/
Black
Use if the vehicle is equipped with a factory
alarm disarm or for retained accessory power
cancellation (RAP).
WHITE (+/- selectable) Parking Light Flash Output (optional)
LT. GREEN/BLACK Factory Alarm Disarm/RAP Cancellation
WHITE/BLUE (-) Remote Start Activation Input
BLACK Ground
GRAY (-) Hood Pin Shutdown Input
BROWN (+) Brake Switch Shutdown Input
VIOLET/WHITE Tachometer Input (optional)
BLUE (-) 200mA Status Output
HH11//11
HH11//22
HH11//33
HH11//44
HH11//55
HH11//66
HH11//77
HH11//88

Directed Electronics Ready Remote Specifications

General

Brand	Directed Electronics
Model	Ready Remote
Category	Remote Starter
Language	English