34
© 2006 Directed Electronics
type D: adding one or more after-market actuators
Vehicles without factory power door locks require the installa-
tion of one actuator per door. This requires mounting the door
lock actuator inside the door. Other vehicles may only require
one actuator installed in the driver's door if all door locks are
operated when the driver's lock is used.
note: Adding door lock actuators can be complicated.
Please contact Directed technical support prior to
attempting the addition of actuators.
H2/2
H2/3
H2/4
H2/5
H2/6
H2/7
LOCK
RELAY
UNLOCK
RELAY
#87
#87A
#30A
#87
#87A
#30A
+ 12V FUSED
7.5A /MOTOR
GREEN/BLACK LOCK #30 COMMON (OUTPUT)
WHITE/BLACK LOCK #87A NORMALLY CLOSED
VIOLET/BLACK LOCK #87 NORMALLY OPEN (INPUT)
BROWN/BLACK UNLOCK #87A NORMALLY CLOSED
BLUE/BLACK UNLOCK #30 COMMON (OUTPUT)
VIOLET UNLOCK #87 NORMALLY OPEN (INPUT)
15A
CHASSIS
GROUND
GREEN
BLUE
CHASSIS
GROUND
To Next Page
Loading...
Need help?
General
