3
© 2006 Directed Electronics
wwhhaatt iiss iinncclluuddeedd
➤ Control Module
➤ One 4-Button Remote
➤ 8-Pin Main H1 Harness
➤ 7-Pin H2 Secondary Harness
➤ 6-Pin Relay Heavy Gauge Wires
➤ Shutdown Toggle Safety Switch
➤ Hood Pin Switch
➤ Installation Kit
➤ Razor Knife
➤ CDROM—Do-It-Yourself Installation Video
Additional parts may be required (such as relays or bypass).
iinnssttaallllaattiioonn ttoooollss
➤ Digital Multi-Meter
➤ Drill
➤
1
/
4 Drill Bit (for hood
pin switch)
➤ Screwdrivers
(Phillips and Flathead)
➤ Wire Stripper
➤ Solder Iron
➤ Electrical Tape
➤ Pliers
➤ Crimping Tool
note: The installation tools listed above may be optional
and those required will vary depending on your vehicle.
To Next Page