©
2005
Directed Electronics, Inc.
31
➤➤
Ignition is turned off.
➤➤
Door is closed.
➤➤
Valet/Program button is pressed too many times.
➤➤
More than 15 seconds elapse between steps.
Transmitter Configurations
The Auto Learn functions in the Transmitter/Receiver Learn Routine will program the transmitter
buttons to the following configuration.
Standard Configuration
When programmed for standard configuration, the transmitter buttons are assigned to the
following functions:
operates Lock, Arm/Panic On/Panic Off
operates Unlock, Disarm/Panic Off
operates Channel 2 and Silent Mode
operates Panic On/Off
and operate Channel 3
and operate Channel 4
and operate Channel 5
and operate Channel 6
To Next Page
Loading...
