Directed Electronics Viper 7652V

➤ Transmitter configuration
Level
Button
A U X
A A U X A U U X X
A U X
Button
Arm
A U X A U X A U X A U X
Direct
Access
x 1 x 2 x 3 x 4
ARM/LOCK SILENT ARM SENSOR SILENT ALARM SILENT ALARM
(Panic) BYPASS SENSORS ALL ZONES
DISARM/UNLOCK SILENT DISARM VALET ON/OFF CAR FINDER
(Panic)
STARTER RESET RUNTIME TIMER MODE SMART START DEFOGGER ON
ON/OFF ON/OFF ON/OFF
TRUNK RELEASE AUX 1 AUX 2 AUX 3
(Red/White)
Advance Level REQUEST TEM- RUNTIME EVENT HISTORY
Change Car (3s) PERATURE * REMAINING * REPORT *
Enter program-
ming (8s) *
* button must be pressed and held to access state.
Command: Press one time to Arm
Feedback: Lock Icon will appear, and one beep from remote
Notes: Press/hold for 1.5 seconds to Arm the system and then acti-
vate the Panic output
Command: Press one time to Arm
Feedback: Unlock icon appears and remote beeps twice
Dis
A U X
A U X
arm Notes:
Command: Press one time to activate Remote Start
Feedback: Remote Start Icon appears on screen. remote emits a tone
Remote
Notes:
Start
A U X
© 2008 Directed Electronics. All rights reserved.
13