EasyManua.ls Logo

Directed Electronics Viper 7652V

Directed Electronics Viper 7652V
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Turning off the Sensor Full Trigger response
You can completely disable the Stinger Doubleguard Shock Sensor
and any added optional sensors on a one-time basis. The entry points
(doors, hood, etc.) will still be monitored. All sensors will not be able to
trigger the Warn-Away response or the Full Alarm response.
1.
After disabling Warn-away response, press the
twice.
2.
Press the
button.
AUX
AUX
the button
Note: The next time you arm the system, the shock sensor will work
normally.
Silent Mode 2 - Turning off the siren
You can turn off the vehicle siren and flashing lights on a one-time basis,
leaving the system’s paging feature as the only alarm response.
Note: Call the police immediately if you witness a crime in progress.
Paging range varies with terrain and environmental conditions.
Full Silent Mode.
In this mode, the siren cannot be triggered, but any trigger will cause the
2-way rem
AUXte to be paged.
Press the
button four times, and then press the
seconds.
Sensor Silent Mode
within five
AUX
In this mode, a sensor cannot trigger the siren, but will cause the
2- way remote to be paged. All entry points (doors, hood, etc.) will still
trigger the siren.
AUX
Press the button three times, and then press the button.
Note: The next time you arm the system, it will function normally.
AUX
© 2008 Directed Electronics. All rights reserved.
27

Related product manuals