Directed 4x03 User Manual

15
© 2012 Directed. All rights reserved.
Bitwriter only options
If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine
has previously been locked, it must be unlocked with Bitwriter® - this cannot be done manually with
the Valet button.
The Bitwriter® gives you access to a wider range of system options. These features and the adjustments
that may be programmed are described in the table below.
Menu Item Feature Default Options
1
Engine Runtime
12 min.
1-60 min.
2
Diesel start type
Off
Timed
3
Diesel start delay time
(seconds)
15 sec
1-90 sec.
4
Virtual Tach Fine Tune
Not initialized
0 to 1 second in 50 millisecond increments
5
Remote control pro-
gramming
Unlocked
Locked
6
Feature Programming
Unlocked
Locked
Bitwriter feature descriptions
1. Engine runtime:
Sets engine runtime during normal remote start operations from 1-60 minutes.
2. Diesel Start Type:
OFF: there is no delay before the engine cranks with the remote start
Timed: turns on the timer for the delay before the engine cranks (to be used in conjunction with the
Diesel Start Delay).
3. Diesel start delay:
Sets the delay before engine crank in 1 second intervals from 1- 90 seconds for diesel engine
vehicles.
4. Virtual tach fine tune:
Adds or subtracts crank time in VirtualTach mode to overcome engine types that short crank or
over-crank on the first start attempt.
5. Remote Control Programming:
Locks and unlocks the user’s ability to enter the remote control/reset menu, and manually change
any functions using the Valet Button.
6. Feature Programming:
Locks and unlocks the user’s ability to enter the feature menus and manually change the main unit
programming using the Valet Button.

Directed 4x03 Specifications

General

Brand	Directed
Model	4x03
Category	Remote Starter
Language	English