EasyManua.ls Logo

Dirt Devil Easy Steamer - TROUBLESHOOTING GUIDE; Troubleshooting Safety Precautions; When to Seek Professional Service; Customer Service Contact Information

Dirt Devil Easy Steamer
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REDUCE RISK OF PERSONAL INJURY
-
UNPLUG CLEANER BEFORE SERVICING WARNING: TO
Cleaner won't run
Cleaner won't pick-up
or low suction
Water escaping from
cleaner
Cleaner attachments
won't pick up
Cleaner attachments
won't spray
Cleaner won't dispense
solution
1.
Dirty water tank hose attachment door
not installed.
2.
Dirty water tank is not installed correctly.
Possible Reasons
1.
Power cord not firmly plugged into outlet.
2.
Blown fuse or tripped breaker.
3.
Needs service.
3.
Dirty water tank is full.
4.
Brushroll worn.
5.
Broken or worn belt.
6.
Nozzle/dirt passage clogged.
7.
Clogged hose inlet.
Possible Solutions
1.
Plug unit in firmly.
2.
Check fuse or breaker. Replace fuselreset breaker.
3.
Take to service center or call
1-800-321 -1 134.
1.
Dirty water tank is full.
2.
Dirty water tank is not installed correctly.
3.
Hose not installed correctly.
4.
Solution reservoir not installed properly.
1.
Replace dirty water hose attachment door.
2.
Review Dirty Water Tank Removal and
Replacement-Pg.
9.
3.
Empty Dirty Water Tank-Pg.
9.
4.
Replace brushroll-Pg.
10.
5.
Replace belt-Pg.
10.
6.
Remove hose; remove obstruction.
7.
Remove hose and clean inlet.
1.
Empty Dirty Water Tank-Pg.
9.
2.
Review
Dirty
Water Tank Removal and Replacement-Pg.
9
3.
Review Hose Installation-Pg.
8.
4.
Review Solution Reservoir Installation-Pg.
7.
1.
Hose is clogged.
2.
Hose inlet clogged.
3.
Dirty water tank is full.
1.
Solution reservoir not installed properly.
I
1.
Review Solution Reservoir Installation-Pg.
7.
1.
Remove hose and tools; remove obstruction-Pg.
8.
2.
Remove hose and clean inlet.
3.
Empty dirty water tank-Pg.
9.
1.
Water supply hose not connected properly.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE
(1 -800-321 -1 1 34)
In the event that further assistance is required, see your Yellow Pages for an authorized Royala Dealer. Costs of any transportation to
and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available
from an authorized Royala Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when request-
ing information or ordering replacement parts. (The model number appears on the back of the cleaner.)
1.
Connect trigger water supply connector and base
water supply connector-Pg.
8.
PLEASE
PRINT
CLEARLY
Address
City
State Zip Code
Daytime Phone No.
USA Residents only: Make check or money order
payable to:
Royal Appliance Mfg. Co.
7005
Cochran Road
Glenwillow,
OH
441
39
Attn. Quick Parts
METHOD OF PAYMENT
1-70091 2-044 64
oz.
Solution
1-700320-600
1
Brush roll Assemblv
1-700750-600
1
Float Filter
Check or Money Order Mastercard
VISA
-
Discover
Card
No.
Expiration Date (required):
aC11QQtlacQIcIaaIIaaaa
Subtotal
AL,
AZ,
CA, CO, CT, FL, GA,
ID,
IL, IN,
KS, MA, MD, MI, MN, MO, NE, NV, NJ,
NY, NC, OH, OK, PA, TN, TX, WA,
WI
Residents Add Local Sales Tax
Shipping
&
Handling Add
$3.00**
(**AK and HI res~dents Add
$5.00)
TOTAL
Signature Telephone Number
I
Daytime
Even~ng
Call
1-800-321-1
134
with
any questions
about
ordering
parts.
11

Related product manuals