How to fix the headlight on my Dirt Devil Platinum Force Vacuum Cleaner?
- EEmily DavisSep 8, 2025
If the headlight on your Dirt Devil Vacuum Cleaner is not working, the bulb may be burnt out and need replacing.
How to fix the headlight on my Dirt Devil Platinum Force Vacuum Cleaner?
If the headlight on your Dirt Devil Vacuum Cleaner is not working, the bulb may be burnt out and need replacing.
Why won't the sensor light turn on/off on my Dirt Devil Vacuum Cleaner?
If the sensor light on your Dirt Devil Vacuum Cleaner won’t turn on or off, the height adjust setting may be too low. Set the height adjust to the proper setting.
How to troubleshoot Dirt Devil Floor Machine that won't turn on?
If your Dirt Devil Floor Machine won’t run, first, ensure it is firmly plugged into the outlet. If it still doesn’t run, check the fuse or breaker and replace the fuse or reset the breaker if necessary. If problems persist, further assistance is needed.
Why my Dirt Devil Floor Machine has low suction?
If your Dirt Devil Floor Machine isn’t picking up or has low suction, you can try the following: * Remove the hose and check for any obstructions. * Clean the inlet after removing the hose. * Empty the dirty water tank. * Replace the brushroll. * Replace the belt.
Why is my Dirt Devil Floor Machine not dispensing soap?
If your Dirt Devil Floor Machine isn't dispensing soap, try these steps: First, clean the pick-up tube orifice in the soap tank using a hot rag, or soak the tube's end in hot water. Then, fill the soap tank with Dirt Devil Carpet and Rug Shampoo. Lastly, make sure the soap switch is in the ON position.
What to do if Dirt Devil Floor Machine attachments won't pick up?
If the attachments on your Dirt Devil Floor Machine aren’t picking up, remove the hose and tools to check for any obstructions. Also, remove the hose and clean the inlet, and empty the dirty water tank.
Section to record vacuum model and manufacturer code for quick reference.
Provides contact details and a reminder to read instructions before use.
Procedure for correctly installing the clean water reservoir into the cleaner unit.
Detailed steps for performing carpet cleaning, including switch functions and solution dispensing.
Guide on using the cleaner with attachments for upholstery and other above-floor surfaces.
Section to record vacuum model and manufacturer code for quick reference.
Provides contact details and a reminder to read instructions before use.
Procedure for correctly installing the clean water reservoir into the cleaner unit.
Detailed steps for performing carpet cleaning, including switch functions and solution dispensing.
Guide on using the cleaner with attachments for upholstery and other above-floor surfaces.
| Type | Upright |
|---|---|
| Bagged/Bagless | Bagless |
| Cordless | No |
| Power Source | Corded Electric |
| Voltage | 120V |
| Height Adjustment | Yes |
| Warranty | 1 year limited |












Loading...