Trench - 48 1330 Operator’s Manual
Trench
7. Push boom control to slowly lower digging boom to desired trench depth.
8. Move speed/direction control to DIG, then slowly pull to desired speed.
9. When trench is complete, push speed/direction control to N (neutral).
10. Move throttle to half open.
11. Pull boom control to raise digging boom to top of trench.
12. Pull digging chain control to N (neutral).
13. Drive away from trench.
14. See page 35 for shutdown procedure.
IMPORTANT:
• Do not make sharp turns. Lower boom to full depth when turning.
• If an object becomes lodged in chain, move attachment speed/direction control to neutral and raise
boom slightly. Reverse chain direction. If object must be removed manually, turn engine off and
engage parking brake.
To Next Page
Loading...