Ditch Witch C24x User Manual

Trench - 54 Cx Series Operator’s Manual
Set Up
Set Up
1. Ensure machine is shut off.
2. Ensure restraint bar is installed correctly:
• The word “DANGER” must be facing up,
as shown.
• Restraint bar must be in correct position.
See “Restraint Bar” on page 100.
3. If equipped, remove backfill blade. See
“Backfill Blade” on page 73.
4. Install correct counterweight configuration.
See “Counterweights” on page 74.
5. Start engine.
6. Drive to starting point. Move in line with
planned trench.
IMPORTANT: Trench cleaner shown
installed on restraint bar is optional.

Ditch Witch C24x Specifications

General

Engine Make	Kubota
Engine Type	Diesel
Transmission	Hydrostatic
Gross Power	24.8 hp
Max Digging Depth	5 ft
Width	48 in
Horsepower	24.8 hp
Max Trenching Depth	5 ft