Service - 80 Cx Series Operator’s Manual
Recommended Lubricants
Welding Precaution
Washing Precaution
Recommended Lubricants
Proper lubrication and maintenance protects Ditch Witch® equipment from damage and failure. Service
intervals listed are for minimum requirements. In extreme conditions, service machine more frequently.
Use only genuine Ditch Witch parts, filters, approved lubricants, TJC, and approved coolants to maintain
warranty. Fill to capacities listed in “Specifications” on page 103.
For more information on engine lubrication and maintenance, see your engine manual.
NOTICE: Welding can damage electronics.
• Welding currents can damage electronic components. Always disconnect the ECU ground
connection from the frame, harness connections to the ECU, and other electronic components
prior to welding on machine or attachments.
• Connect welder ground close to welding point and make sure no electronic components are in the
ground path.
• Failure to disconnect battery will cause damage to battery.
NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical
components with water.
Item Description
GEO Gasoline engine oil meeting or exceeding API SJ
See oil temperature chart for recommended viscosity grade for each model.
MPL Multipurpose gear oil meeting API GL-5 (SAE 80W90)
THF Tractor hydraulic fluid, Phillips 66® PowerTran Fluid, Mobilfluid® 432, Chevron® Tractor
Hydraulic Fluid, Texaco® TDH Oil, or equivalent
To Next Page
Loading...
Need help?
General
