Ditch Witch C24x User Manual

Cx Series Operator’s Manual Drill - 59
Set Up
Install Drilling Attachment
The operating position of the drilling attachment
is on the right side of the machine.
1. Shut off machine.
2. Remove attachment from storage position.
See “Remove Drilling Attachment” on
page 68.
3. Fully insert mount pin (3) in cylinder of
attachment plate (1), aligning drilling
attachment with drill string.
4. Secure assembly with pin (2).
Connect Hydraulic Lines
1. Remove dust covers from connectors (A, B).
2. Disconnect hydraulic connector (1) and
connect with connector (A).
3. Disconnect hydraulic connector (2) and
connect with connector (B).

Ditch Witch C24x Specifications

General

Engine Make	Kubota
Engine Type	Diesel
Transmission	Hydrostatic
Gross Power	24.8 hp
Max Digging Depth	5 ft
Width	48 in
Horsepower	24.8 hp
Max Trenching Depth	5 ft